Policy Interventions Favouring Small Business: Rationales, Results and Recommendations
DOI:
https://doi.org/10.11575/sppp.v10i0.42626Abstract
Small business has a well-deserved reputation as the driver of job growth and as a key contributor to innovation. In the 12 years ending in 2013, small and medium-sized enterprises (SMEs) accounted for about 90% of private sector job growth in Canada. What is less well-recognized, however, is that a small fraction of SMEs account for most of the job growth and innovation. As a result, governments have offered broad-based support for small businesses, rather than focusing on high-impact entrepreneurs. This approach is wasteful: firms that do not grow or innovate receive most of the benefits. Further, this approach can harm economic performance by promoting the expansion of smaller, lessefficient firms at the expense of larger ones. The federal government elected in 2015 is focussing new initiatives on innovative and growth-oriented businesses. Legislated reductions in the small business tax rate were reversed and targeted support for innovative SMEs was increased. While the change in direction is welcome, almost 85% of the $7 billion yearly funding for small business continues to provide broad-based support. The largest program is the special low rate of tax for small businesses, implemented to improve access to financing for capacity-expanding investment. This measure is harming economic performance because the cost of shifting capital and labour from large to smaller, less-efficient businesses outweighs the benefit from improving access to capital. Large subsidies for small business financing are also provided by the Business Development Bank of Canada (BDC). With access to cheap government funding, the BDC is profitable, but evaluated using a more realistic cost of financing, the bank operates at a substantial loss. This loss exceeds the benefit from improving access to capital, particularly for the bank’s direct-lending program. While there is a solid argument for supporting R&D, subsidies provided to small firms are so generous that they are harming economic performance. The federal government provides a 35% tax credit for R&D performed by small firms. Provincial tax credits raise the subsidy rate to about 42%. And those firms receiving support from the federal Industrial Research Assistance Program can have almost 60% of their project costs paid by the government. By way of contrast, large firms performing R&D receive subsidies from federal and provincial tax credits amounting to under a quarter of their costs, an intervention which improves economic performance. Canada has had what could be described as a small business policy – broad-based support for all small businesses. The newish federal government is moving to an entrepreneurship policy: new initiatives emphasize support for the high-impact firms and individuals that make an outsized contribution to Canada’s innovation and prosperity. Making the transition to the new framework will require overhauling legacy small business policies to free up resources for new initiatives and to secure fiscal savings. Three changes would pay big dividends: • Eliminate the small-business corporate income tax deduction. • Reduce the enhanced R&D tax credit rate to the same level as the regular credit. • Replace the BDC’s direct loan program with a loan guarantee program.Downloads
Published
Issue
Section
License
The following is the copyright statement of SPPP.
Copyright © <Author name> <year>. This is an open-access paper distributed under the terms of the Creative Commons license CC BY-NC 4.0, which allows non-commercial sharing and redistribution so long as the original author and publisher are credited.
Publication Copyright and Licensing
The following guidelines and information, provided in six sections, are intended for authors (the “Author”) who are invited to write a paper (the “Work”) for The School of Public Policy Publications (the “Publisher”). The rights and responsibilities conveyed in the SPP Author Agreement will only apply once your paper is accepted for publication. At that point in the publication process, you will be asked to download the form and return a signed copy via e-mail to spppublications@ucalgary.ca. Please review the below information to ensure agreement with SPPP policies.
Section 1: Author’s Grant of Rights
In consideration of the Publisher’s agreeing to publish the Work in The School of Public Policy Publications, the Author hereby grants to the Publisher the following:
1.1 The irrevocable, royalty-free right to publish, reproduce, publicly display, publicly perform and distribute the Work in perpetuity throughout the world in all means of expression by any method or media now known or hereafter developed, including electronic format;
1.2 The irrevocable, royalty-free right to use the Author’s name and likeness in association with the Work in published form and in advertising and promotional materials related to the Work; and
1.3 The irrevocable, royalty-free right to license others to do any or all of the above.
Section 2: Prior Publication & Publication by Others
2.1 The Author agrees not to publish the Work, or authorize any third party to publish the Work, either in print or electronically, prior to publication of the Work by the Publisher.
2.2 The Author agrees not to publish the Work in any publication outlet which is substantially similar to The School of Public Policy Publications for a period of six (6) months after publication of the Work in The School of Public Policy Publications. Substantially similar is defined as a non-subscription, open-access publication outlet with a similar mandate/vision and intended audience.
2.3 Should the Author publish or distribute the Work elsewhere at any time or in any alternate format, the Author agrees to contact The School of Public Policy Publications to inform them of the subsequent publication.
2.4 Should the Author publish or distribute the Work elsewhere at any time or in any alternate format, the Author agrees to make reasonable efforts to ensure that any such additional publication cites the publication in The School of Public Policy Publications by author, title, and publisher, through a tagline, author bibliography, or similar means. A sample acknowledgement would be:
“Reprinted with permission from the author. Originally published in the The School of Public Policy Publications, http://www.policyschool.ca/publications/.”
Section 3: Editing and Formatting
The Author authorizes the Publisher to edit the Work and to make such modifications as are technically necessary or desirable to exercise the rights in Section 1 in differing media and formats. The Publisher will make no material modification to the content of the Work without the Author’s consent.
Section 4: Author’s Ownership of Copyright and Reservation of Rights
4.1 Nothing in this agreement constitutes a transfer of the copyright by the Author, and the copyright in the Work is subject to the rights granted by this agreement.
4.2 The Author retains the following rights, including but not limited to, the right:
4.2.1 To reproduce and distribute the Work, and to authorize others to reproduce and distribute the Work, in any format;
4.2.2 To post a version of the Work in an institutional repository or the Author’s personal or departmental web page so long as The School of Public Policy Publications is cited as the source of first publication of the Work (see sample acknowledgement above).
4.2.3 To include the Work, in whole or in part, in another work, subject to Section 2 above and provided that The School of Public Policy Publications is cited as the source of first publication of the Work (see sample acknowledgement above).
4.3 The Editors and Editorial Board of The School of Public Policy Publications requires authors to publish the Work under a Creative Commons Attribution-NonCommercial 4.0 International licence (CC BY-NC 4.0). This license allows others to distribute, remix, tweak, and build upon the Work for noncommercial purposes, and ensures the Author is credited for the original creation. This onward licensing is subject to section 2.4 of this agreement, which further ensures that the original publisher is credited.
Section 5: Author’s Warranties and Undertakings
The Author warrants that:
5.1 The Author is the sole author of the Work, or if a joint author, the Author has identified within the Work the other authors, and holds the copyright, either solely or jointly, and has the power to convey the rights granted in this agreement.
5.2 The Work has not previously been published, in whole or in part, except as follows:
5.3 Any textual, graphic or multimedia material included in the Work that is the property or work of another is either explicitly identified by source and cited in the Work or is otherwise identified as follows:
5.4 To the best of the Author’s knowledge, the Work does not contain matter that is obscene, libelous, or defamatory; it does not violate another’s civil right, right of privacy, right of publicity, or other legal right; and it is otherwise not unlawful.
5.5 To the best of the Author’s knowledge, the Work does not infringe the copyright or other intellectual property or literary rights of another.
5.6 The Author will indemnify and hold Publisher harmless against loss, damages, expenses, awards, and judgments arising from breach of any such warranties.
Section 6: The Reuse of Third-Party Works
The Publisher requires that the Author determine, prior to publication, whether it is necessary to obtain permissions from any third party who holds rights with respect to any photographs, illustrations, drawings, text, or any other material (“third-party work”) to be published with or in connection with your Work. Copyright permission will not be necessary if the use is determined to be fair dealing, if the work is in the public domain, or if the rights-holder has granted a Creative Commons or other licence. If either the Author or Publisher determines for any reason that permission is required to include any thirdparty work, the Author will obtain written permission from the rightsholder.
